BLE NANO V3 5VDC
- Keywish Upgraded nano board for arduino. The main chip is ATMEGA328P-MU QFN32, the latest bootloader (Arduino IDE 1.8.8) was burned down. It is fully compatible with the common nano board. BLE-Nano-Board is PIN-PIN compatible with Arduino Nano V3
- PCB dimensions: 48mm*19mm, the pinout is compatible with Nano V3.0 Convenient micro usb port.
- Bluetooth TI CC2540 BLE (SOC) chip. Maximum support 1Mbps air data transfer rate, stable performance. Communication distance: 50M in open environment.
- Complete Information reference: If you need data sheets and schematics or other informations, you can download from https://github.com/keywish/keywish-nano-plus/tree/master/BLE-Nano
Use Arduino IDE version 1.8.6 or higher. Install the CC2540 driver then follow this selection path in Arduino IDE：Tools – Board“Arduino Nano” Processor “ATmega328P”