If you want to switch large electric currents using an electronic control and require control isolation at the same time, then this card is a valuable asset.

8 Relays on one PCB with darlington transistor array and 110 volt power supply.
Relays will handle up to 5 amps with Common and NC and NO brought out to screw terminal connectors.
Same as K6714-16 but with half as many relays. br>Room for noise suppression caps and resistors on board.
Helps extend contact life of the relays.

Specifications

• the relays can be controlled in different ways: direct control from
• open-collector outputs, TTL or CMOS level
• DIP switches are included to allow
• manual activation of the relays in case of maintenance work
• 16 relay outputs
• contact: 10A / 28VDC or 125VAC, max. 5A at 230VAC
• power supply: 125VAC max. 12VA
• output voltage: 12V / 250mA
• PCB dimensions: 150 x 212mm (5.9″ x 8.4″)

Features
also available with 16 relays: K6714-16

Specifications

• 8 relays included (extendible to 16)
• the relays can be piloted directly of through open-collector outputs
• contact: 1 x inverter: 10A / 28VDC or 125VAC, max. 5A at 230VAC
• relay switch-over contact: max. 5A at 220V
• output voltage: 12V / 250mA for power supply
• power supply: 220 or 115VAC / 12VA
• PCB dimensions: 150 x 212mm (5.9″ x 8.4″)

recommended housing: WCAH2507